Xiaomi Robot Vacuum S10+ EU
4000Pa Powerful suction fan blower
Pressure mopping with constant moisture
LDS laser navigation system


4000Pa Powerful suction fan blower. Vacuum dust and debris in one go
Stronger fan blower suction power allows you to clean your home more efficiently. With the 4000Pa fan blower suction power, your daily cleaning needs can be met easily. The 4 suction power settings allow you to clear away dust, hair and large particles in one go.

Up to 2 hours of battery life* Easily handle large homes
5200mAh nominal battery capacity. Last up 2 hours* in Standard mode, offering you greater peace of mind. The robot is capable of cleaning over 200㎡* areas with one pass in Standard mode, more than enough to handle large rooms.

Pressure mopping* at constant moisture. Effectively remove stains, 4 times the cleaning power*
The dual mop pads rotate at high speeds to simulate the effect of manual pressure mopping, greatly improving the cleaning power and effectively removing wet, dry and other stains.

Double-layer composite mop pads. Strong water absorption and effective removal of stains
Mop pads made of woven fabrics (80% polyester + 20% modified polypropylene fibre) retain moisture evenly. Powerful cleaning performance effectively removes floor stains when mopping and can effectively protect floor surfaces throughout the house.

Large-capacity smart electronic control water tank. Mop floors up to 150㎡ in one pass*
Smart electronic control water tank with increased 200ml capacity* releases water evenly without leakage. Constant moisture mopping for up to 80 minutes, sufficient to meet the floor cleaning needs of a 150㎡* household in one pass.

3D obstacle avoidance. Fewer collisions even in dim-light environments
Millimetre-level obstacle identification. No more than 5mm* margin of error between detected distance and actual distance. The robot precisely avoids obstacles and protects painted furniture surfaces, significantly reducing the risk of getting stuck and ensuring fewer collisions even in dim-light environments.

Carpet edge identification* To prevent mounting the carpet when mopping
When the robot works in the Mopping mode, the robot will automatically avoid the carpet so that the mop pads do not soak it.

Laser navigation with scanning of the entire house. Accurately plan cleaning routes
With the assistance of dual-line laser and LDS LIDAR, the robot can carry out 360° scanning of rooms and quickly build a map, regardless of room lighting conditions, then accurately plan the cleaning route without any omission or error.

TÜV Rheinland Cybersecurity and Privacy Protection Standard Certification

Remote control via the Xiaomi/Mi Home app. Clean the home automatically wherever you are
Control remotely via the Xiaomi/Mi Home app. Even if you are out and about, you can still make sure a clean house with just one tap.
Specifications
Main unit parameters
Model
B105
Item Dimensions
350×350×97 mm
Rated Power
55W
Charging Time
Approx. 6 hours
Net Weight (with Accessories)
4.4 kg
Net Weight (Robot Vacuum)
3.8 kg
Battery
4800 mAh (Rated Capacity)
5200 mAh ( Nominal Capacity )
Rated Voltage
14.4 V?
Charging Base Specifications
Model
CDZ2101
Item Dimensions
130×126×93 mm
Rated Input
100-240 V~50/60 Hz 0.5 A
Rated Output
19.8 V?1 A
Package contents
Robot Vacuum×1
Brush×1
Brush Cover×1
Dust Compartment×1
Water Tank×1
Side Brush×1
Cleaning Tool×1
Power Cord×1
Mop Pad × 2 (Pre-installed)
Mop Pad Holder×2
Charging Dock×1
Drop sensor
Used to detect steps and drops
Robot will back up when the sensor detects a drop in height against typical media of approximately 85mm (white) or 15mm (black)
Ultrasonic sensor
Used to identify carpet material
LDS laser sensor
Used in image formation
Model in use is the D2M, the corresponding measurement distances are White: 0.15–8m and Black: 0.15–4m
Line laser sensor
Used to detect small obstacles
Laser can reach 50–400mm in a straight line
AI Visual identification sensor
Used to detect certain obstacles and furniture.
Extended edge sensor
Used along the wall
IMU Sensor
Robot vacuum motion status detection
Motion can be detected in the following areas:Acceleration ranges ±2g/±4g/±8g/±16g?Gyroscope ranges from ±125°/s to ±200°/s
Drive wheel lift sensor
Used to detect if drive wheel is off the ground
Detects if wheels are lifted and triggers the drive wheel to stop if lifted in motion
Air pressure sensor
Test for dust collection capacity and blocked ducts
Product Weight (kg) | 3.8 |
---|---|
Brand | xiaomi |